Installation - Flush-Fit - Miele KM 7999 FR Operating And Installation Instructions

Installation – flush-fit
 Create the worktop cut-out. Remem-
ber to maintain the minimum safety
distances (see "Installation – Safety
distances").
 Solid wood, tiled and glass worktops:
Fix a wooden frame 6 mm below the
top edge of the worktop (see the dia-
gram in "Installation – Flush-fit").
 Stick the supplied sealing strip under
the edge of the hob.
 Feed the power cable for the hob
down through the worktop cut-out.
 Centre the hob in the cut-out.
The gap between the ceramic glass
surface and the worktop must be at
least 2 mm wide. This is required so
that the hob can be sealed.
 Connect the hob to the power supply.
 Check that the hob works.
 Seal the gap between the hob and
worktop with a silicone sealant that is
heat-resistant to at least 160 °C.

Damage from unsuitable sealant.
Unsuitable sealant can damage nat-
ural stone.
For natural stone worktops and nat-
ural stone tiles, only use silicone
sealant that is specially formulated
for natural stone. Follow the manu-
facturer's instructions.
Installation
77