Others
Your camera does not work.
Use the type of battery pack you can use with this camera (page 106).
•
The battery level is low (The E indicator appears). Charge the battery pack (
•
"Read This First").
The power is on, but the camera does not work.
The built-in microcomputer is not working properly. Remove the battery pack, and then, after
•
one minute, insert the battery pack and turn on the camera.
Cannot identify an indicator on the screen.
See page 19.
•
The lens gets fogged.
Moisture condensation has occurred. Turn off the camera and leave it for about an hour before
•
using it (page 108).
The camera becomes warm when you use it for a long time.
This is not a malfunction.
•
The Clock Set screen appears when you turn on the camera.
Set the date and time again (
•
100
step 2 in "Read This First").
t
step 1 in
t