The flash does not work.
The flash is set to
•
You cannot use the flash when:
•
[Mode] (REC Mode) is set to [Burst] or [Multi Burst] (page 35).
–
(Twilight mode) or
–
•
Set the flash to
(Landscape mode),
The close-up (Macro) function does not work.
(Twilight mode),
•
mode
(page 27)
The date and time are recorded incorrectly.
Set the correct date and time (
•
The F value and shutter speed flash when you press and hold the shutter
button halfway down.
The exposure is incorrect. Correct the exposure (page 31).
•
The image is too dark.
You are shooting a subject with a light source behind the subject. Select the metering mode
•
(page 33) or adjust the exposure (page 31).
The brightness of the screen is too low. Adjust the brightness of the LCD backlight (page 53).
•
Turn on the screen (page 21).
•
The image is too bright.
You are shooting a spotlighted subject in a dark location such as on a stage. Adjust the
•
exposure (page 31).
The brightness of the screen is too bright. Adjust the brightness of the LCD backlight (page
•
53).
The image colors are not correct.
Picture Effect function is activated. Cancel the Picture Effect function (page 36).
•
Vertical streaks appear when you are shooting a very bright subject.
The smear phenomenon is occurring. This phenomenon is not a malfunction.
•
Noise appears in the image when you view the screen in a dark place.
The camera is attempting to increase the visibility of the screen by temporarily brightening
•
the image under conditions of low illumination. There is no effect on the recorded image.
80
(No flash) (
t
(Candle mode) of the Scene mode, or
(Forced flash) (
t
(Snow mode), or
(Landscape mode), or
.
step 2 in "Read This First").
t
step 5 in "Read This First").
step 5 in "Read This First") to shoot still images when
(Beach mode) is selected as the Scene mode.
(Candle mode) is selected for the Scene
(movie) is selected.