Sony DSC-S60 Fall 2005 User's Manual / Troubleshooting page 59

Stage 2: Preparing the camera
and the computer
1
Insert a "Memory Stick" with
recorded images into the camera.
• When copying images in the internal
memory, this step is unnecessary.
2
Insert the batteries with enough
capacity remained in the camera,
or connect the camera to a wall
outlet (wall socket) with the AC
Adaptor (not supplied).
• When you copy images to your computer
using insufficient batteries, copying may fail
or image data may be corrupted if the
batteries shut off too soon.
• For DSC-ST80, also refer to the operating
instructions "Cyber-shot Station".
3
Set the mode dial to
on the camera and the computer.
POWER
Stage 3: Connecting the camera
and your computer
• For DSC-ST80, also refer to the operating
instructions "Cyber-shot Station".
To the multi
connector
, then turn
"USB Mode Normal" appears on the screen
of the camera.
When a USB connection is established for
the first time, your computer automatically
runs a program to recognize the camera.
Wait for a while.
* During communication, the access indicators
turn red. Do not operate the computer until the
indicators turn white.
• If "USB Mode Normal" does not appear, set
[USB Connect] to [Normal] (page 54).
Cable for multi-use
terminal
To a USB connector
• With Windows XP, the AutoPlay wizard
appears on the desktop.
USB Mode
Normal
Memory Stick
Switch on
MENU
Access
indicators*
59