Table of Contents
Advertisement
JDDRII_2.4V : Header for Memory Voltage Overclocking
When processing Memory Voltage Overclocking, please place the jumper to
pin1-2 Closed. The Default setting is Pin 2-3 Closed.
Note:
1.
When "JDDRII_2.4V" jumper cap is placed on Pin 1-2, memory voltage
can be manually adjusted under CMOS setup.
2.
When "JDDRII_2.4V" jumper cap is placed on Pin 2-3, memory voltage
will be fixed at 2.4V automatically, and can't be adjusted under COMS
setup.
Before setting memory voltage overclocking, please ensure that your DDR II
supports up to 2.4V. (Consulting your DDR2 memory module supplier)
1
1
3
3
Pin 1-2 Close:
Normal status (default).
1
3
Pin 2-3 Close:
Memory voltage Overclocking.
TForce 550 SE
21
Advertisement
Table of Contents
