Table of Contents
Advertisement
2.2
F
H
AN
EADERS
CPU FAN Header: JCFAN1
1
System Fan Header: JSFAN1
1
Note:
The JCFAN1 and JSFAN1support system cooling fan with Smart Fan
Control utility. It supports 3 pin head connector. When connecting with wires
onto connectors, please note that the red wire is the positive and should be
connected to pin#2, and the black wire is Ground and should be connected
to GND.
2.3
M
M
EMORY
ODULES
2.2.1
DDR Module installation
1. Unlock a DIMM slot by pressing the retaining clips outward. Align a
DIMM on the slot such that the notch on the DIMM matches the break
on the Slot.
2. Insert the DIMM vertically and firmly into the slot until the retaining chip
snap back in place and the DIMM is properly seated.
NF325-A7
Pin
1
JCFAN1
2
3
Pin
1
2
JSFAN1
3
I
NSTALLATION
11
Assignment
Ground
+12V
FAN RPM rate sense
Assignment
Ground
+12V
FAN RPM rate sense
Hide quick links:
Advertisement
Table of Contents
