VTech Play & Chase Puppy Parents' Manual page 7

NOTE
This product is in Try-Me mode in the packaging. After opening the
package, please remove the demo tag from the bottom of the unit.
Then, turn the Play & Chase Puppy off and on again to proceed with
normal play. If the unit powers down or if the light fades out during
play, please install a new set of batteries.
ACTIVITIES
1. Light Up Buttons
Press the Light Up Buttons to learn
numbers, counting, feelings and
motions, as well as hearing sing-
along songs and music. The puppy
will dance and move in response to
the voice and sound responses if it is
on the floor. The lights will flash with
the sounds.
2. Hand Button
Give puppy a high five by pressing
the Hand Button, as well as hearing
playful phrases and music. The lights
will flash with the sounds.
3. Front and Back Sensors
The puppy is equipped with special
sensors on the front and back of the
hoverboard. Approach the sensors
to activate them and see the puppy
ride away or rotate and respond with
playful phrases, music and sounds.
The lights will flash with the sounds.
7