Biostar I86PE-A7 Bios Setup Manual page 30

Biostar i86pe-a7 motherboard: supplementary guide
Hide thumbs Also See for I86PE-A7:
Table of Contents

Advertisement

7.4
PCI / VGA P
Choose Disabled or Enabled. Some graphic controllers that are not
VGA compatible take the output from a VGA controller and map it to their
display as a way to provide boot information and VGA compatibility.
However, the color information coming from the VGA controller is drawn
from the palette table inside the VGA controller to generate the proper
colors, and the graphic controller needs to know what is in the palette of
the VGA controller. To do this, the non-VGA graphic controller watches
for the Write access to the VGA palette and registers the snoop data. In
PCI based systems, where the VGA controller is on the PCI bus and a
non-VGA graphic controller is on an ISA bus, the Write Access to the
palette will not show up on the ISA bus if the PCI VGA controller responds
to the Write.
In this case, the PCI VGA controller should not respond to the Write, it
should only snoop the data and permit the access to be forwarded to the
ISA bus. The non-VGA ISA graphic controller can then snoop the data
on the ISA bus. Unless you have the above situation, you should disable
this option.
Disabled (default)
Enabled
I86PE-A7 BIOS Setup
S
ALETTE
NOOP
Disables the function.
Enables the function.
29

Advertisement

Table of Contents
loading

Table of Contents