Changing A Wheel - Renault KWID Owner's Manual

changing a Wheel (1/2)

Switch on the hazard warn-
ing lights.Keep the vehicle
away from traffic and on a
level surface where it will
not slip (if necessary, place a solid
support under the jack base).Apply
the parking brake and engage a
gear (first or reverse).
Ask all passengers to leave the
vehicle and keep them away from
traffic. If the vehicle is parked on
the hard shoulder, you must warn
other road users of your vehicle's
presence with a warning triangle.
5.4
removing the Wheel
Use the wheel wrench to loosen the
wheel bolts by firmly holding the wrench
and applying force to unscrew.
Remove completely one of the wheel
bolts and screw-in the stud a (provided
in spare wheel lock screw ) in its place,
this helps to locate wheel while refitting
and retains position when all the wheel
bolts are removed.
Place the jack under the body ,and
align it to be in-between two locating
markings. It is forbidden to lift the car
by placing any jack under front control
arms, rear axle and subframe.
Crank the jack using wheel wrench until
the tyre raises up and sufficient