Radio (Am/Fm); Source Selection; Listening To Radio; Storage Of Radio Stations - Renault KWID Owner's Manual

radio guide(4/7)
Switchin on and off
Short Press 17 to switch on user's
radio system. The audio system can
be used with ignition off .It will run till
the battery lasts. Switch off the radio by
long pressing 17.

Source Selection

User can choose from various sources
by short press the button 10.
Volume Controls
Adjust the volume by rotating button
17 either clockwise or anticlockwise
directions
The displays shows volume setting
value (from 00 to 36)
Increase the volume by rotating in
clockwise direction
Decrease the volume by rotating in
anti-clockwise direction
Mute Function
The Mute function can be enabled by
pressing the button 14.
To continue to listen press same button
briefly.
7.10
User can Play or pause using the same
button when radio is connected to
Auxiliary devices via. USB or AUX port
(button no 7 and 8)

Listening to radio

Press button 10 to choose from FM - 1
FM - 2 or AM.
FM 1 – stores the first 6 channels in the
band automatically.
FM 2 – stores the next 6 channels in the
band automatically.
aM – Amplitude Modulated wave band
Selecting a radio station
There are different modes for choosing
a radio station.
1. automatic search - It allows stations
to be searched automatically scanning
the selected band.
To access the station, press button 13.
To stop search short press button 13.
2. Manual search - This mode allows
user search for stations manually by
scanning the selected waveband.
To access the stations, press and hold
button 9. Release button 9 to refine the
search step by step.
In case of AM band the frequency
increase or decrease by 9 KHz.

Storage of radio stations

This operating mode allows user to
listen to the radio stations that user
have previously stored on demand.
Select a waveband, and then select a
radio station using the modes described
previously.
To store a station, press one of the
buttons from 1 to 6 to store it in desired
position.
It is possible to store 6 stations per
waveband (FM 1, FM 2, or AM).
To recall the stored station, press one
of the buttons from 1 to 6.
Listening to the radio
When listening to the radio, briefly
press button 13 to activate the auto
store mode .The radio returns to the
last Auto stored station played. User
can select user's choice of station by
using buttons from 1 to 6.
Note
Some buttons(from 1 to 6) may not
correspond to a radio station if the
automatic search function has found
fewer than 6 six stations
The best reception will be programmed
as channel 1 and can be selected by
pressing button 1