Commissioning; Operation; Maintenance And Repair; Decommissioning - Bosch Rexroth LT353 Manual

3 609 929 B46/2008-09 | LT353/LT354/LT355
7

Commissioning

CAUTION
Risk of damage to persons
and property!
Commissioning of the LT35x
servo amplifier requires basic
mechanical and electrical
knowledge.
y Only qualified personnel (see
"Personnel qualifications" on
page 18) are authorized to
commission the system.
y Once the device has been
switched off, it cannot be
switched back on again until
at least 30 seconds have
elapsed.
If you use the components in an existing
system as a replacement or an extension, you
must install the firmware that is used in the
system.
Before commissioning, check that all plug-in
connections are firmly fitted.
8

Operation

Operation is not necessary while the system is
running.
Bosch Rexroth AG
9 Maintenance and
repair
Cleaning and care
CAUTION
Any dirt or liquids penetrating
the device lead to
malfunctions!
Safe function of the LT35x servo
amplifier is no longer ensured.
y Pay particular attention to the
utmost cleanliness when
working with the LT35x servo
amplifier.
Maintenance
The LT35x servo amplifier is maintenance-
free if employed for its intended use.
Spare parts
Please refer to the address directory under
www.boschrexroth.com and in chapter
"16 Service and sales" on page 28 for the
addresses of our foreign subsidiaries.
10

Decommissioning

For details on how to disassemble or replace
the LTU35x servo amplifier, please refer to
chapter "11 Disassembly and replacement"
on page 26.
25/84