Operation - Bosch MUZ8CC2 Operating Instructions Manual

MUZ8CC.book Seite 9 Freitag, 1. August 2014 2:17 14

Operation

Important information
In these instructions for use the recom-
mended reference values for the operating
speed refer to appliances with a 7-setting
rotary switch.
For appliances with a 4-step rotary switch
the guide values can be found in the follo-
wing table:
7 settings: 1...2...3...4...5...6...7
4 settings: 1........2........3........4
Warning!
Application guidelines!
The dicer is suitable only for dicing pota-
toes (raw or boiled), carrots, cucumbers,
tomatoes, peppers, onions, bananas,
apples, pears, strawberries, melons, kiwis,
eggs, soft pork sausage (e.g. Mortadella),
boiled or fried boneless poultry.
Very soft cheese (e.g. Mozarella, Feta)
can not be processed.
In the case of cheese slices (e.g. Gouda)
and hard cheese (e.g. Emmentaler)
the quantity processed in one cycle
must not exceed 3 kg.
Before processing pip and stone fruits
(apples, peaches, etc.), remove the pips
or stones. Before processing boiled
or fried meat, remove the bones.
Food must not be frozen.
If these guidelines are not observed,
the dicer, including the cutting grid and
the rotating blade, may be damaged.
If the dicer is not used as intended,
is modified or is used improperly,
Robert Bosch Hausgeräte GmbH cannot
assume liability for any resulting damage.
Also excluded is the liability for damage
(e.g. blunt or deformed blades) which result
from the processing of unapproved food.
Important information:
– Fruit/vegetables should not be too ripe,
as the juice may escape.
– Leave cooked food to cool down before
dicing it, as it will then be firmer and
the dicing result will be better.
– The length of the cubes can be influenced
by increasing or reducing the pressure
on the pusher.
Robert Bosch Hausgeräte GmbH
Operating speed
Select operating speed according to the food
to be diced.
Setting 3 (2): boiled potatoes, carrots and
eggs, cucumbers, bananas, strawberries,
melons.
Setting 5 (3): raw potatoes and carrots, soft
sausage (e.g. Mortadella), cheese slices,
hard cheese, peppers, tomatoes, onions,
apples, kiwifruit.
Assembling dicer insert
Insert the cutting grid into the base

holder. Observe recesses!
Insert the cutter disc into the base holder.

Press up the 3 catches until they lock

into position.
Working with the dicer
Press release button and move

multi-function arm to position 1.
Cover unused drives with drive

covers.
Insert the bowl:

– Tilt the bowl forwards and then
set it down.
– Turn anti-clockwise until it locks
into place.
Press release button and move

multi-function arm to position 3.
Remove drive cover from the drive

of the continuous-feed shredder
(Fig. -4a).
Place housing on the drive and turn

all the way in an anti-clockwise direction.
Insert drive shaft.

Warning!
The opening in the drive shaft (Fig.
not be blocked with food remnants, etc.
Insert the dicer insert. The arrow on the

dicer insert and the arrow on the housing
must be in alignment!
Attach the cover (note mark, Fig. -8)

and turn all the way in a clockwise
direction.
Insert the mains plug.

Turn rotary switch to recommended

setting.
Place the food to be diced in the feed

tube. If required, apply light pressure
to the pusher. If required, chop up food
beforehand.
en
Fig. 
Fig. 
-6) must

9