Room Monitor - NEC SL1000 Features And Specifications Manual

SL1000
Description
Room Monitor lets an extension user listen to the sounds in a co-workers area. For example, the
receptionist could listen for sounds in the warehouse when it is left unattended. To use Room Monitor,
the initiating extension and the receiving extension must activate it.
When using multiline terminals for monitoring, an extension user can Monitor only one extension at a
time. However, many extensions can Monitor the same extension at the same time. However, only one
single line telephone can monitor another single line telephone at a time.
R
Room Monitor for Single Lines
This option enables you to monitor the room status through your single line telephones. Between multi-
line terminals, the monitored room status is picked up by the telephone microphone and the activity is
heard through the speaker of the monitoring multiline terminal. Between single line telephones, at the
station to be monitored, a user goes off-hook and dials a service code and the extension number of the
monitoring telephone. At the monitoring station, a user goes off-hook and dials a service code and the
extension number of the monitored telephone. The activity of the area where the monitored telephone
is placed can then be heard at the monitoring telephone. This service is available until the handset of
the monitored telephone is placed on-hook.
Room Monitor by intercom call (DSX Base)
• Room Monitor can simply start by calling Room Monitored set terminal. During Room monitoring by
pressing Talk softkey at monitoring terminal both way talk is available. Adding both way talk, moni-
tored terminal can make conference call by Talk softkey if multiple terminals are monitoring.
To provide this feature, following PRG need to set On.
PRG 20-13-55: Intercom call to room monitor (COS of Room Monitored)
PRG 20-13-11: Room Monitoring
PRG 20-13-12: Room Monitored
• Setup for Room Monitored terminal is simply pressing DND key plus dial 5.
• Room Monitored terminal can display the Monitoring extension number on it's LCD.
• Only Multiline terminal can be set as Monitored terminal. IP multiline terminal or SLT are not sup-
ported.
• When Monitored terminal canceled the monitored condition by DND plus dial 0 or pressing Function
key, Monitoring terminal setting also cleared automatically.
The use of monitoring, recording, or listening devices to eavesdrop, monitor,
retrieve, or record telephone conversation or other sound activities, whether or
not contemporaneous with transmission, may be illegal in certain circumstances
under federal or state laws. Legal advice should be sought prior to implementing
any practice that monitors or records any telephone conversation. Some federal
and state laws require some form of notification to all parties to a telephone con-
versation, such as using a beep tone or other notification methods or requiring
the consent of all parties to the telephone conversation, prior to monitoring or
recording the telephone conversation. Some of these laws incorporate strict
penalties.
Conditions
• Room Monitor is for listening only. It does not allow for conversation between the monitoring and
monitored extensions.
• An extension user cannot monitor an Attendant.
• A multiline terminal user cannot monitor a single line telephone and a single line telephone cannot
monitor a multiline terminals.
1-430
ISSUE 1.0

Room Monitor

Room Monitor