NEC SL1000 Features And Specifications Manual page 112

SL1000
Program
Number
14-01-02
14-01-03
14-02-02
14-05-01
14-06-01
C
14-07-01
15-01-05
15-02-01
15-02-02
15-02-22
15-03-03
15-06-01
15-07-01
15-13-01
15-13-02
20-02-09
20-02-15
20-06-01
20-10-07
20-13-13
20-13-23
21-01-15
21-01-16
21-01-17
1-104
Program Name
Basic Trunk Data Setup - Transmit Level
Basic Trunk Data Setup - Receive Level
Analog Trunk Data Setup - Ring Detect Type
Trunk Group - Trunk Group Number
Trunk Group Routing - Priority Order Number
Trunk Access Map Setup
Basic Extension Data Setup - Restriction for
Outgoing Disable on Incoming Line
Multiline Telephone Basic Data Setup - Display
Language Selection (To select options 8~10,
press either 8 or Flash, then press line keys
1~3. Key 1 is option 8, Key 2 is option 9, and
Key 3 is option 10.)
Multiline Telephone Basic Data Setup - Trunk
Ring Tone
Multiline Telephone Basic Data Setup - Multiple
Incoming From Intercom and Trunk
Single Line Telephone Basic Data Setup -
Terminal Type
Trunk Access Map for Extensions
Programmable Function Keys
Loop Keys - Outgoing Option
Loop Keys - Incoming Option
System Options for Multiline Telephones -
Disconnect Supervision
System Options for Multiline Telephones -
Caller ID Display Mode
Class of Service for Extensions
Class of Service Options (Answer Service) -
Automatic Off-Hook Answer
Class of Service Options (Supplementary
Service) - Continued Dialing (DTMF) Signal on
ICM Call
Class of Service Options (Supplementary
Service) - Display the Reason for Transfer
System Options for Outgoing Calls - Outgoing
Disable on Incoming Line (Toll Restriction)
System Options for Outgoing Calls - Supervise
Dial Detection Timer
System Options for Outgoing Calls - Restric-
tion Digit in Outgoing Disable on Incoming
Line
Default
32 (0dB)
32 (0dB)
0
Trunk Port 1~126 = Priority 1~126
Route 1, Order Number 1 = 1
(Trunk Group 1)
Order Numbers 2, 3, 4 = 0 (Not
Specified)
All Other Routes (2~25) and Order
Numbers (1~4) = 0 (Not Specified).
Access Map 1 = Trunk Ports 1~126
assigned with option 7 access
(incoming and outgoing access and
access when trunk is on Hold).
Access Map 2~126 = Trunk Ports
1~126 assigned with option 0
access (No access).
0
1
2
1
0
1
Refer to Programming Manual.
0: Programming Function Key No.
= 01-24
0: Programming Function Key No.
= 01-24
1
0
All extension port = Class 1
COS 01~15 = 1
COS 01~15 = 1
COS 01~15 = 0
0
20 (seconds)
4
Central Office Calls, Answering
ISSUE 1.0
Note