Programming Ambient Air Pressure; Ignition Curve Plug-In Connector - GAS GAS EC 250 2021 Owner's Manual

17 TUNING THE ENGINE
17.5
17.6
120

Programming ambient air pressure

Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may result in unconsciousness and death.
–
Always make sure there is sufficient ventilation when running the engine.
–
Use effective exhaust extraction when starting or running the engine in an enclosed space.
Info
If the vehicle is ridden with the engine running at various heights above sea level, the ambient pressure is pro-
grammed on an ongoing basis.
If the vehicle is transported over great differences in height, the ambient pressure must be reprogrammed.

Ignition curve plug-in connector

Info
Turn clockwise to decrease the idle speed.
Turn counterclockwise to increase the idle speed.
Make the setting in small steps.
An incorrect idle speed can have a negative impact on over-
all engine running.
–
Start the vehicle at the new height above sea level and switch off
the engine again.
–
Wait for at least five seconds.
–
Start the vehicle again and check the response of the vehicle.
» If the response has not improved:
–
Repeat the procedure.
H02349-01
1
Plug-in connector
on the frame under the fuel tank.
Info
The ignition timing map connector has no function in the
homologated (restricted) condition of the motorcycle.
Possible states
Soft – The plug-in connector of the ignition timing map adjustment
•
is disconnected to achieve better rideability.
Performance – The plug-in connector of the ignition timing map
•
adjustment is joined to achieve higher performance.
S04502-10
of the ignition timing map adjustment is located