How To Install The Monitor On A New Computer - BenQ GL2030 User Manual

How to install the monitor on a new computer

This instruction details the procedure for selecting and installing the BenQ LCD Monitor driver
software on a new computer which has never had a monitor driver installed before. This
instruction is only suitable for a computer which has never been used before, and for which the
BenQ LCD Monitor is the first ever monitor to be connected to it.
If you are adding the BenQ LCD Monitor to an existing computer that has already had another monitor
connected to it (and has monitor driver software installed), you should not be following these instructions.
You should instead be following the instructions for How to upgrade the monitor on an existing computer.
1. Follow the instructions in
When Windows starts, it will automatically detect the new monitor and launch the Found New
Hardware Wizard. Follow the prompts until it displays the option to Install Hardware Device
Drivers.
2. Insert the BenQ LCD Monitor CD-ROM into a CD drive on the computer.
3. Check Search for a suitable driver for my device
4. Check the option for CD-ROM drives (uncheck all others) and click
5. Look to confirm that the wizard has selected the correct name of your monitor and click
Next .
Finish
6. Click
7. Restart the computer.
To find the suitable driver files for the purchased model, refer to the following table.
12 Getting the most from your BenQ monitor
How to assemble your monitor hardware on page
.
Driver files
GL930
GL930A
GL931
GL931A
GL2030
GL2030A
GL2230
GL2230A
GL2231
GL2231A
option, and click
Suitable models
GL930, GL930M
GL930A, GL930AM
GL931, GL931M
GL931A, GL931AM
GL2030, GL2030M
GL2030A, GL2030AM
GL2230, GL2230M
GL2230A, GL2230AM
GL2231, GL2231M
GL2231A, GL2231AM
7.
Next .
Next .