Schematic Diagram Notes - Panasonic SH-FX71 Service Manual

13 Schematic Diagram Notes

(All schematic diagrams may be modified at any time with
the development of new technology)
Notes:
S1000: ID SET switch.
S1001: ON/OFF switch.
S1002: SURROUND SELECTOR switch.
• Importance safety notice :
Components identified by ( ) mark have special character-
istics important for safety.
Furthermore, special parts which have purposes of fire-retar-
dant (resistors), high-quality sound (capacitors), low-noise
(resistors), etc. are used.
When replacing any of components, be sure to use only
manufacturer's specified parts shown in the parts list.
• Capacitor values are in microfarad(μF) unless specified
otherwise, F=Farad, pF=Pico-Farad
Resistance values are in ohm(Ω), unless specified other-
wise, 1K=1,000Ω, 1M=1,000KΩ
• Voltage and Signal lines:
: +B Signal line
: -B Signal line
: AUDIO OUTPUT signal line
Special Note :
• This model uses Switching Mode Power Supply (SMPS) for
providing necessary voltages.
• There is no schematic drawings included in this document
for the SMPS Module.
• It is advisable to replace the SMPS module as an assembly
unit.
• * Ref is for indication only.
24