Serial/Multi Sync In> / <Multi Sync Out> Terminals - Panasonic PT-MZ880 Operating Instructions Manual

<SERIAL/MULTI SYNC IN> / <MULTI SYNC OUT> terminals
The <SERIAL/MULTI SYNC IN> terminal of the projector conforms with RS-232C so that the projector can be
connected to and controlled from a computer.
A combined screen with a balanced contrast can be displayed by linking multiple projectors using the <SERIAL/
MULTI SYNC IN> terminal and the <MULTI SYNC OUT> terminal, and sharing the brightness level of the video
signal input to each projector when structuring a multi-display screen by combining the projected images from
multiple projectors. It is also possible to synchronize the shutter operation of the specified projector to other
projectors.
For the connection method of the projectors when using the contrast synchronization function or the shutter
synchronization function, refer to "Connecting example when using the contrast synchronization function/shutter
synchronization function" ( x page 46).
Connection for RS-232C communication
When connecting directly
When connecting using DIGITAL LINK compatible device
Projector connecting terminals
DIGITAL LINK
LAN cable (straight)
Chapter 7 Appendix — Technical information
Client
Send first command
First session
Respond first command
Send second command
Second session
Respond second command
Projector connecting terminals
D-Sub 9p (female)
D-Sub 9p (male)
DIGITAL LINK compatible device
DIGITAL LINK
Server
Connection query
Sending key
Cut off
Connection query
Sending key
Cut off
Computer
Communication cable (straight)
D-Sub 9p (female)
D-Sub 9p (male)
Computer
Communication cable (straight)
ENGLISH - 191