Canon iP3000 Simplified Service Manual page 6

(3-1. Operator Call Error (cont'd))
LED
Error [Error code]
blinking
9 times The connected digital camera or
digital video camera does not
support Camera Direct Printing.
[2001]
10 times Automatic duplex printing
cannot be performed (paper
size not supported). [1310]
11 times Failed in automatic print head
alignment. [2500]
Access cover open. [1200]
*1: Only for models supporting CD-R printing
*2: Only for models not supporting CD-R printing
Corrective action
After removing the cable between
the camera and the printer, press the
Resume/Cancel button, and
re-connect the cable.
Press the Resume/Cancel button to
eject the paper being used at error
occurrence. Printing will resume
from on the front side of the next
page.
Press the Resume/Cancel button,
and after confirming the following,
perform print head alignment again:
- Set an appropriate type and size
of paper (plain paper, A4 or letter).
- Check that the nozzle check
pattern is properly printed (all ink
ejected, no faint printing).
- Protect the paper output slot from
exposure to excessive light.
Close the access cover.
6
Remarks
Data which was to be printed on
the back side of paper at error
occurrence is skipped (not
printed).