Table of Contents
Advertisement
OPERATION________________________________
Dryironing
1
Place the iron on a heat-resistant, even, stable, dry,
non-slip surface.
2
Set the steam control switch
3
Insert the power plug into an earthed wall socket.
4
Set the temperature as described in the "Selecting
the temperature and steam setting" section.
5
You can start ironing when the blue temperature
indicator light
turns off. Do not turn the steam
B
control switch on during dry ironing.
Caution
When taking a break from ironing, always place the
iron upright and at a suitable distance to prevent you
from being burned by the soleplate.
6
When you have finished ironing, set the
temperature control dial
plug from the earthed wall socket and let the iron
cool down in a location that is safely out of the
reach of children.
Fillingthewatertank
The water tank can be refilled at any time when you
are using the iron. Please fill the water tank with the
measuring beaker
.
M
1
Make sure the iron is unplugged.
2
Turn the steam control switch
3
Hold the iron in one hand and slightly tilt it. Open
the cap on the water-filling opening
water tank with tap water or distilled water to the
MAX mark. The maximum quantity is 350 ml.
26
ENGLISH
to
.
E
to MIN. Disconnect the
K
to
.
E
. Fill the
F
4
Close the water-filling opening cap
hear a click.
5
You can now plug in your iron.
Tip
If your tap water is very hard, we recommend that
you mix 50% tap water with 50% distilled water,
or use distilled water only.
Steamironing
1
Place the iron on a heat-resistant, even, stable, dry,
non-slip surface.
2
Fill the water tank as described in the "Filling the
water tank" section.
3
Insert the power plug into an earthed wall socket.
4
Set the temperature and steam control as
described in the "Selecting the temperature and
steam setting" section.
5
You can start ironing when the blue temperature
indicator light
turns off.
B
– If your laundry is very dry, press the water spray
button
.
D
– Press the steam boost button
stubborn creases.
6
When you have finished ironing, set the
temperature control dial
control switch
to
E
from the earthed wall socket and let the iron cool
down in a location that is safely out of the reach
of children.
Sprayfunction
At any temperature, simply press the water spray button
several times to moisten the article and remove
D
stubborn creases. Make sure there is water in the water
tank.
Steamboostfunction
When the temperature setting is between ●●● and
MAX, press and release the steam boost button
to remove stubborn creases and increase the steam's
distribution across your garment.
until you
F
to remove
C
to MIN and the steam
K
. Disconnect the plug
C
Advertisement
Table of Contents
