Table of Contents
Advertisement
Riello 7000
13 Fitting the insulation (Riello 7000.2000/F - 3000/F - 5000/F)
Once the storage tank is correctly positioned inside the
room where it is to be installed, proceed to fit the insula-
tion and the accessories to complete the tank.
Proceed as follows:
- Unpack all the material from the second package.
- Wrap the insulation (1) around the storage tank, careful-
ly lining up the fittings with the holes on the inside of
the insulation. Secure the insulation in place with the
zips (2) at the edges of the two sections.
- Perforate the insulation at the fittings and fit the insu-
lation sleeves (3).
- Fit the flange cover (4).
- Finally, fit the insulation top panel (5) and cover it with
the cover (6).
With all the insulation in place, apply the serial
number plate, data plate and product identification
plate to ensure that the storage tank can be accura-
tely identified (see the plate positions on page 14).
2
1
10
2
2
1
6
5
3
4
Advertisement
Table of Contents
