Table of Contents
Advertisement
5. UNINSTALLING PROCEDURES
If you wish to remove the Belkin USB Ethernet Adapter component from your
computer, do the following:
1. Disconnect the USB cable from the adapter.
2. Select My Computer / Control Panel / Add/Remove Programs.
3. In the Install/Uninstall tab, select USB Ethernet Adapter.
4. Click Add/Remove.
5. Click Yes.
The software program will be automatically removed by Windows
6. TROUBLESHOOTING
If you encounter difficulties when installing or using the Belkin USB Ethernet
Adapter, use the following table to troubleshoot the problem.
PROBLEM
You cannot find the other computer (on the
Ethernet side of the network connection).
When reconnecting the USB device, the
system seems to take a long time.
The system installation appears to be slow.
The Ethernet Adapter does not work when
connected through a bus-powered USB hub.
SUGGESTED SOLUTION / COMMENTS
Use the Windows
®
Find Computer option.
Be patient when reconnecting a USB device.
Wait at least 20 seconds between disconnecting
and connecting devices.
Be patient when Windows
®
Adapter (or any other USB device). Plug and
Play operations in Windows
take up to 30 seconds or so between apparent
activities.
The Belkin USB Ethernet Adapter is a (USB)
bus-powered product. Current versions are
considered high power devices (that is, they
consume more than 100 mA when in operating
mode). Thus, they cannot be used downstream
of bus-powered hubs, which deliver only 100
mA per port. The adapter will enumerate
correctly, but the operating system will not
allow it to come up to full power.
8
.
®
is installing the
®
can sometimes
Advertisement
Table of Contents
