Connect Audio Components To The Audio Filter - Belkin PureAV AP21100-12 User Manual

Hookup and Installation
Step 5

Connect Audio Components to the Audio Filter

The PureAV Power Console PF31 contains an isolated Audio Filter that is
optimized to clean and condition the power to all of your audio
components. The Audio Filter also isolates your audio components from
connected video and high-current audio components. The audio filter
outlets are "Switched" and are controlled by the "Switched" button the
front of the Power Console.
A. Attach PureAV power cord labels to each component's power cord
before you plug the cord into the corresponding outlet on the Power
Console.
B. CD – Connect your CD player power cord to the outlet labeled "CD".
C. Tape – Connect your tape player power cord to the outlet labeled "Tape".
D. Auxiliary – This outlet can be used to connect any other audio
equipment you may have.
E. Receiver (Preamp) – Connect your receiver or preamp power cord to
the outlet labeled "Receiver".
Note: You can connect any type of audio component into the Audio
Filter outlets. You are not limited to the components listed above
10