Connect Video Components To The Video Filter; Step 4 - Belkin PureAV AP21100-12 User Manual

Hookup and Installation

Step 4

Connect Video Components to the Video Filter

The PureAV Power Console PF31 contains an isolated Video Filter that is
optimized to clean and condition the power to all of your video components.
The Video Filter also isolates your video components from connected
audio and high-current audio components. The video filter outlets are
"Always on" when the Power Console is plugged into a live AC outlet.
A. Attach PureAV power cord labels to each component's power cord
before you plug the cord into the corresponding outlet on the Power
Console.
B. VCR – Connect your VCR power cord to the outlet labeled "VCR".
C. DVD – Connect your DVD power cord to the outlet labeled "DVD".
D. Cable/Satellite – Connect your cable or satellite receiver power cord to
the outlet labeled "Cable/SAT".
E. TV – Connect your TV or monitor power cord to the outlet labeled
"TV/Monitor".
Note: You can connect any type of video component into any of the
Video Filter outlets. You are not limited to the components
listed above.
9