Table Of Contents; Description; Safety; Purpose Of This Manual - Greenlee Quick Draw 7804SB Manual

Table of Contents

Description ..................................................................... 2
Safety ............................................................................. 2
Purpose of this Manual .................................................. 2
Other Publications .......................................................... 2
Important Safety Information ...................................... 3-4
Specifications ................................................................. 5
Capacity and Draw Stud Selection Guide ...................... 6
Operation ....................................................................... 7
Maintenance ................................................................... 8
Troubleshooting ............................................................. 9
Draw Studs and Accessories ....................................... 10
Greenlee Textron / Subsidiary of Textron Inc.
®
Quick Draw Hydraulic Punch Drivers
KEEP THIS MANUAL

Description

®
The Quick Draw punch drivers are self-contained
hydraulic tools.
These punch drivers, when used with Greenlee
punches, dies, and draw studs, form a complete system
for punching holes of various shapes and sizes through
mild steel, aluminum, fiberglass, and plastic.
Slug-Splitter ® punches, dies, and studs are available for
punching all of these materials as well as stainless steel.
In addition, the 7704SB / 7706SB punch driver has a
flexible body that allows hole punching at a variety of
angles. The handle and release mechanisms rotate
nearly 360° for convenient actuation.

Safety

Safety is essential in the use and maintenance of
Greenlee tools and equipment. This manual and any
markings on the tool provide information for avoiding
hazards and unsafe practices related to the use of this
tool. Observe all of the safety information provided.

Purpose of this Manual

This manual is intended to familiarize all personnel with
the safe operation and maintenance procedures for the
following Greenlee hydraulic punch drivers:
7704SB / 7706SB Quick Draw Flex™
7804SB / 7806SB Quick Draw
7904SB / 7906SB Quick Draw 90
Keep this manual available to all personnel.
Replacement manuals are available upon request at
no charge.

Other Publications

Service Manual:
7704SB / 7706SB: Publication 999 4732.3
7804SB / 7806SB: Publication 999 4732.3
7904SB / 7906SB: Publication 999 4731.5
All specifications are nominal and may change as design improve-
ments occur. Greenlee Textron shall not be liable for damages
resulting from misapplication or misuse of its products.
Quick Draw Flex is a trademark and Quick Draw, Quick Draw 90,
Slug-Buster, and Slug-Splitter are registered trademarks of
Greenlee Textron.
2
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815/397-7070
®
®