Section 4: Operation - Meridian SMOOTHWALL BIN Owner's Manual

Table of Contents

Advertisement

Owner's Manual: Smoothwall Bin
• Read and understand the owner's manual,
and all safety decals, before using.
• Keep
all
bystanders,
children, away when loading/unloading or
performing any maintenance work.
• Do not crawl under opened unloading chute
to inspect for a suspected blockage.
• Do not attempt to enter bin through the top
loading hatch.
• Only enter bin when it is empty.
• Establish a Lock-Out Tag-Out policy for your
work site. Always lock-out tag-out power
source before entering bin or performing any
maintenance work.
This Meridian® Smoothwall Bin has been designed and engineered for loading capacities up to 62 lb
per cubic foot. The GrainMax series holds up to 50 lb per cubic foot and are recommended for grain
storage only.
Many features incorporated into this bin are the result of suggestions made by customers like you.
It is the responsibility of the owner and users to be familiar with the bin(s) and all the auxiliary loading/
unloading equipment before starting. By following the recommended procedures, a safe working
environment is provided for the workers and bystanders in the work site.
Hazard controls and accident prevention are dependent upon the personnel working with and maintaining
the equipment. Their awareness, concern, prudence and proper training are crucial.
By following these instructions, in conjunction with a good maintenance program, your bin will provide
many years of trouble-free storage.
Revised 06.2021

Section 4: OPERATION

especially
small
• Climbing ladder with care to prevent falling.
• Raise and latch ladder in the up position when
not being used to prevent unauthorized use.
• Do not load/unload bin from the side. It can
cause side loads and damage the structure.
• Wear appropriate safety gear including but
not limited to protective clothing, goggles
and respirator before entering bin. Also
attach a safety line to an anchor outside
before entering.
• Do not enter bin to break loose impacted,
caked or bridged material. Use a long pole
or plank to dislodge and break the material
loose while outside bin.
®
4-1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents