NEC DLP Cinema NP-NC1402L User Manual page 41

6
Press the DOWN button.
The submenu "BIOS" another rank lower than "Model" is displayed.
7
Press the LEFT/RIGHT button to select the submenu "Release Package."
At each press of the LEFT/RIGHT button, the display will cycle as "Model" ←→ "Serial No." ←→ "Release Package" ←→
"Kernel" ←→ "U-Boot" ←→ "System Files" ←→ "Cinema Firmware" ←→ "Cinema Data" ←→ "ICP Firmware" ←→ "ICP
ConfigFile" ←→ "FMT FPGA" ←→ "Secure Processor" ←→ "Slave BIOS" ←→ "Slave Firmware" ←→ "Opt MCUFirmware"
←→ "LD Interface" ←→ "LD Driver1" ←→ "Laser Driver2" ←→ "Laser Driver3" ←→ "Laser Driver4" ←→ "Lens Firmware"
and each version information is displayed.
8
Press the UP button several times.
At each press of the UP button, the display will return to a menu one level above.
4. Using Menus
41