NEC DLP Cinema NP-NC1402L User Manual page 19

1-3-5. Control panel
1. LCD screen
The LCD screen displays menus and setting values for the projector operations.
2. /// (UP/DOWN/LEFT/RIGHT) buttons
Press these buttons to select a menu item while a menu is displayed.
3. MENU button
Press this button to display the menu for various settings and adjustments. (See page 43)
4. ENTER button
Press this button to select the menu item.
5. EXIT button
Press this button to return to the previous menu item.
6. KEY LOCK button
Press this button to lock (KEY LOCK) the buttons on the control panel. Buttons on the control panel do not function while KEY
LOCK is on.
Pressing the KEY LOCK button for one second or longer while KEY LOCK is off locks the buttons.
Pressing the KEY LOCK button for one second or longer while KEY LOCK is on unlocks the buttons. (See page 35)
KEY LOCK becomes automatically on if no control panel operation takes place in the standby state for 30 seconds
NOTE
by default. (See page 35)
7. POWER button
Press this button for more than three seconds to turn on or off (standby) the projector. (See page 60)
In order to start up the projector, turn on the main power switch for the projector to set the projector in the standby state. (See
page 28)
8. DOUSER button
Press this button to open and close the douser. (See page 60)
9. LIGHT ON/OFF button
Press this button for five seconds or longer to turn on or off the light source while the projector is on. (See page 36)
10. LIGHT button
Press this button to display the light source adjustment menu. (See page 34)
1. What's in the Box? and the Names of the Projector Parts
1
2
3
4
5
10
11
14
6
7
8
9
13
12
19