Hoover POWERDASH FH50700 User Manual page 13

Maintenance
Belt Maintenance
HOW TO REPLACE
1
Place new belt on motor
shaft.
2
Slip brushroll through
belt.
3
Position non-belt side
end cap of brushroll into
pocket.
4
Carefully stretch belt to
locate other end cap into
pocket, making sure that
the end caps are in their
correct orientation.
5
Replace belt covers and
secure by replacing all 6
screws.
*in front of wheel
STORAGE: Allow brushes and underside of carpet
cleaner to air dry thoroughly before storing carpet
cleaner on a carpeted or wood surface.
13