u
d
5. Use the
or
•
REPEAT
•
NEXT
•
PREVIOUS
•
DELETE
6. Press
to stop playback and return to standby.
e
10.3
Adjust the speaker volume
You can adjust the base loudspeaker volume from low to high. Press
increase the volume, or
10.4
Delete all messages
M
1.
Press
, scroll
d
DELETE ALL
2. Scroll
to
3. Display shows CONFIRM?, press
10.5
Record a memo
You can record memo messages for other users which can be played back just like
M
normal messages. Memos can only be recorded using the handset.
1.
Press
, scroll
d
RECORD MEMO
2. Scroll
to
3. After the tone record your memo by speaking into the handset, press
end recording.
4. The memo is automatically played back and then stored as a new message.
10.6
Outgoing messages (OGMs)
This is the message your callers hear on the answer machine. There are two pre-
recorded outgoing messages, or you can record your own.
10.6.1
Record also
The pre-set Record also outgoing message, that allows your caller to leave a
message, is 'Hello, your call cannot be taken at the moment, so please leave your
message after the tone'.
10.6.2 Answer only
The caller can listen to your announcement but cannot leave a message. The
pre-recorded message is 'Hello, your call cannot be taken at the moment, and you
cannot leave a message, so please call later.'
Using the answering machine
M
to change the options.
M
press
to repeat current message.
M
press
to play next message.
M
press
to play previous message.
press
to delete the current message.
-
to decrease the volume.
u
d
or
to
ANSW MACHINE
M
and press
u
d
or
to
ANSW MACHINE
and press
M
and press
.
.
M
and press
.
+
to
M
.
M
.
M
to
37