Loading A Program; Saving Programs - Behringer ULTRA-DYNE PRO DSP9024 User Manual

Press the softkey B (Memory) in the <PROCESS> menu to access the <MEMORY> menu. The Up and Down
cursor keys can be used to select and listen to programs in this menu. An information window displaying the
selected program appears as soon as you press one of the cursor keys. At the same time, the displayed preset
is automatically played. Use softkey D (A/B) to compare it with the program you have been editing. The currently
active program is indicated by a bold letter in the pictogram: A is the edited version, while B is the selected
program. To load the program, press softkey A (LOAD) and follow the instructions in Chapter 2.2.3. Softkey C
(CLEAR) clears your current program from the memory and permits the selection of a default preset.
The message "CLEAR WORKSPACE" is displayed when the softkey C (CLEAR) is pressed.
Confirm the query with "OK" to reset all current parameters to their defaults. Be sure to save
the edited program first if desired.

2.2.3 Loading a program

Press the softkey A (Load) in the <PROCESS> menu to access the <LOAD> menu. The same information
window is displayed in the fader area as when operating a fader. Use the Up and Down cursor keys to select
a program and listen to it with the softkey D (LISTEN). The listening function is indicated by a highlighted
"LISTEN" in the pictogram. Next, select the desired program with softkey A (OK) or return to the
<PROCESS> menu with softkey B (CANCEL).

2.2.4 Saving programs

Use the softkey B to access the <STORE> menu. This also displays an information window in which you can
select a program location to save your own creation using the Up and Down cursor keys. Use softkey A (OK) to
assign a name to the program or softkey B (CANCEL) to cancel the save operation and return to the <PROCESS>
menu. If a program location is already occupied, the warning OVERWRITE PROGRAM? will appear. Press
softkey A (OK) again to assign a name to your program. A window with a character map will now appear in the
display. Choose the character you require with the cursor keys and it will appear at the flashing cursor in the
name field. Use the softkeys B and C to move the cursor in the name field. Softkey D (CLEAR) deletes any
characters which may have already been entered. Program names can have a maximum of 12 characters.
Once the name is complete, press softkey A (OK) to return to the <PROCESS> menu.
12
ULTRA-DYNE PRO DSP9024
Fig. 2.2: <MEMORY> menu
Fig. 2.3: <LOAD> menu
Fig. 2.4: <STORE> menu
2. OPERATION