Digital Input Specifications; Operating Environment; Mechanical Specifications - Siemens RUGGEDCOM RSG920P Installation Manual

Technical Specifications
5.5 Digital Input Specifications
Speed Interface
a
(Mbps)
10/100/1000 TX
a
Auto-negotiating.
b
Shielded or unshielded.
c
Auto-crossover and auto-polarity.
d
Typical distance. Dependent on the number of connectors and splices.
e
RMS 1 minute.
5.5

Digital Input Specifications

Isolation to System
Input 1 to Input 2
Isolation
Input Voltage
Logic High
Logic Low
Wetting Voltage
Input/Output Current
5.6

Operating Environment

The RUGGEDCOM RSG920P is rated to operate under the following environmental
conditions.
Ambient Operating
Temperature
Ambient Storage Temperature
Ambient Relative Humidity
Maximum Altitude
a
Measured from a 30 cm (12 in) radius surrounding the center of the enclosure.
b
Operating temperature may vary based on the limitations of installed SFPs. Refer to the RUGGEDCOM
SFP Transceivers Catalog for SFP temperature ratings.
c
Non-condensing.
5.7

Mechanical Specifications

Weight
Ingress Protection
Enclosure
34
a
Connector Duplex
RJ45 FDX/HDX
1.5 kVAC
1 kVDC
+/- 30 V Maximum
+10 ~ + 30 V
-30 ~ + 8 V
+9.5 V
5-10 mA
-40 to 85 °C (-40 to 185 °F)
ab
-40 to 85 °C (-40 to 185 °F)
c
5% to 95%
2000 m (6562 ft)
4.7 kg (10.5 lbs)
IP40 (1 mm or 0.04 in objects)
Aluminum
b
Cable Type Wiring
Standard
> CAT-5 TIA/EIA
T568A/B
Installation Manual, 04/2021, C79000-G8976-1172-07
Maximum Isolation
c d
Distance
100 m 1.5 kVAC
(328 ft)
RUGGEDCOM RSG920P
e