Advertisement
OPERATING INSTRUCTIONS
CONTROL PANEL SETTINGS
Plugging it in: Connect the (DC) 12/24V or (AC) 100/240V with a power adapter.
The unit will buzz/beep and the display screen will light up for 2 seconds,
entering regular operation mode.
USB charging port: +5V DC/1A, suitable for small devices like mobile phones or
tablets.
Turning it on: Press
Adjusting the temperature: Press the button "+" or "—" until the figure on the
screen begins flashing, then you can adjust the temperature by "+" or "—" If you
stop holding the button for 4 seconds, the temperature will set.
Left zone: Press "+" or "—" to adjust temperature.
Right zone: Press"—" followed by
temperature.
Note: the displayed temperature is the current temperature of the dual zones.
If the set temperatures are much higher or lower than the original
temperature, the display screen will not present the set temperature
immediately and will only do so once the dual zones reach the set
temperature.
Unlocking the control panel: Control panel will lock automatically after 20
seconds without touching any button. To unlock press "+" and "- "together for
2 seconds (the circle in the screen will change from clockwise to
counterclockwise once unlocked).
to switch the electric cooler on/off.
newair.com
8
. Then press "+" or "—" to adjust
Hide quick links:
Advertisement
