Table of Contents
Advertisement
4. ADJUSTING AMBIENT TEMPERATURE AND DHW TEMPERATURE
The system must be equipped with an ambient thermostat for controlling the room temperature.
+/-
Adjust the ambient temperature (
) and the DHW temperature (
) by pressing the respective
buttons ( gure 1).
The ignition of the burner is shown on the display with the symbol ( ) as described in section 3.1.
HEATING
While the boiler is operating in heating mode, the display ( gure 1) shows the ashing symbol (
) and the heating de-
livery temperature (°C).
DOMESTIC HOT WATER
While the boiler is operating in DHW mode, the display ( gure 1) shows the ashing symbol (
) and the DHW output
temperature (°C).
5. DESCRIPTION OF BUTTON
(Summer - Winter - Heating Only - Off)
Press this button to set the following boiler operating modes:
• SUMMER
• WINTER
• HEATING ONLY
• OFF
In SUMMER mode, the display shows (
). The boiler satis es requests for DHW only while central heating is NOT ena-
bled (ambient frost protection function active).
In WINTER mode, the display shows (
and
). The boiler satis es requests for both DHW and central heating (am-
bient frost protection function active).
In HEATING ONLY mode, the display shows (
). The boiler satis es requests for central heating only (ambient frost
protection function active).
In OFF mode, the display shows neither of the above two symbols (
) (
). In this mode only the ambient frost pro-
tection function is enabled, any other request for DHW or heating is not satis ed.
INSTRUCTIONS FOR USERS
- en
6
Hide quick links:
Advertisement
Table of Contents
