Table of Contents
Advertisement
:h^d/E' D/ Ed d DW Z dhZ E ,t d DW Z dhZ
The system must be equipped with an ambient thermostat for controlling the room temperature.
+/-
Adjust the ambient temperature (
) and the DHW temperature (
) by pressing the respective
buttons (figure 1).
The ignition of the burner is shown on the display with the symbol ( ) as described in section 3.1.
HEATING
While the boiler is operating in heating mode, the display (figure 1) shows the flashing symbol (
) and the heating de-
livery temperature (°C).
DOMESTIC HOT WATER
While the boiler is operating in DHW mode, the display (figure 1) shows the flashing symbol (
) and the DHW output
temperature (°C).
^Z/Wd/KE K& hddKE
^
t
,
K
K
Press this button to set the following boiler operating modes:
• SUMMER
• WINTER
• HEATING ONLY
• OFF
In SUMMER mode, the display shows (
). The boiler satisfies requests for DHW only while central heating is NOT ena-
bled (ambient frost protection function active).
In WINTER mode, the display shows
(
and
). The boiler satisfies requests for both DHW and central heating (am-
bient frost protection function active).
In HEATING ONLY mode, the display shows (
). The boiler satisfies requests for central heating only (ambient frost
protection function active).
In OFF mode, the display shows neither of the above two symbols (
)
(
). In this mode only the ambient frost pro-
tection function is enabled, any other request for DHW or heating is not satisfied.
INSTRUCTIONS FOR USERS
7222863.02 - en
6
Hide quick links:
Advertisement
Table of Contents
