How To Power Dc Appliances With This Product; How To Use The Flashlight - Westinghouse iGen600s User Manual

Portable power station 600 running watts, 1200 peak watts
Table of Contents

Advertisement

Available languages

Available languages

HOW TO POWER DC APPLIANCES WITH THIS PRODUCT

1. Connect the power cable plug of the electrical appliance to USB
outlets or 12V ports.
2. Press the "DC Power ON/OFF" button to turn on. The button will
illuminate when it is on.
3. The LED Display will display real-time wattage of the appliance.
4. When finished, press "DC Power ON/OFF" to turn off DC power.
NOTICE: If the total output exceeds the wattage output of the DC outlet,
the power station will automatically shut off. Please ensure the power
consumption is less than what the outlet is rated for before using the device.
QUICK CHARGE OUTPUT: This product supports Type-A QC3.0 and
Type-C PD that output 5V/3A, 9V/2A, and 12V/1.5A, for smart devices. The
actual output voltage and current depend on the smart devices, it can be
obtained by consulting the smart device manufacturer.
12V 6MM OUTPUT: The device comes with a 12V 6mm port. This can
output 12V DC, up to 8A. If you plan on using the 6mm outlet confirm
whether your DC 12V appliance supports charging with a 6mm DC plug
(The diameter of the DC port of the product is 6 mm).
PROTECTION MODE: Short-circuit/Overload Protection: If the AC or DC
output is short-circuited or overloaded (- Load(s) power output is greater
than 600W), the unit will shut down power output to protect itself. Some
devices, such as refrigerator, ice maker or a laser printer may require a
surge power, the surge power could exceed 1200W or even higher, this
could cause overload protection with this unit. Please remove the devices
and consult with the device manufacturers for more information.

HOW TO USE THE FLASHLIGHT

1. Press Flashlight ON/OFF button once to turn light on
2. Press button again to make light 50% brightness
3. Press a third time for 10% brightness.
4. Press a fourth time to turn light off
SOS MODE: While the light is on, hold down flashlight button for 3
seconds to activate SOS mode. Single press to turn SOS mode off.
WARNING: Do not look directly into the light. May cause damage due
to the strong light.
Westinghouse Outdoor Power Equipment - 10

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents