Removing The Bezel - Sony KDL-40R450A Repair Manual

REMOVING THE BEZEL

1. Remove the screws and detach the Power Cord.
2. Disconnect connectors from the TCON and H Board.
Caution:To avoid damaging the connector, make sure the H Board is
disconnected before removing the SPK BFL from the Rear Cover.
3. Remove the harness assembly carefully.
4. Gently lift up the cover and dettach from LCD Panel.
KDL-40R450A/46R450A
SECTION 3 - REPAIR INFORMATION
5. Flip the TV face up and press the gap between the LCD Panel and
Bezel.
6. Gently lift up and unhook the Bezel to dettach.
19