2.5.
Cycle End
When the cycle is complete, this is the screen that will appear. The flag icon
shows the exact time when the target was reached.
2.6.
Automatic Holding Cycle
The Holding mode will start automatically. From left to right the screen will
show you the upper temperature limit to trigger a high temperature alarm, the
current temperature during the chilling mode, the energy usage at this time,
the low limit to trigger a low temperature alarm, the set air temperature for the
holding cycle, the time elapsed during the holding cycle and if the unit is in
defrost.
Blast Chiller Touch Screen Manual
23
23
Rev08/04/2015