Garage Door O pener
1 Integrated remote control
transm itter
2 Portable remote control
transm itter
Warning!
W hen program m ing a garage
door opener, the door moves
up or down.
When program m ing or oper
ating the remote control make
sure there is no possibility of
anyone being harmed by the
moving door.
The built-in rem ote control is
capable of operating up to three
separately controlled objects.
Notes:
Certain types of garage door
openers are incom patible with the
integrated opener. If you should
experience difficulties with pro
gram m ing the transm itter, contact
your authorized M ercedes-Benz
dealer or call M ercedes-Benz
C ustom er Assistance Center (in
the U.S.A. only) at 1-800-FOR-
MERCedes.
For operation in the USA only:
This device com plies with Part 15
of the FCC Rules. Operation is
subject to the following two
conditions:
(1) This device m ay not cause
harm ful interference, and
(2) this device m ust accept any
interference received, including
interference that may cause
undesired operation.
Any unauthorized modification to
this device could void the user's
authority to operate the equipm ent.
Program m ing or reprogramm ing
the remote control:
1. Turn key in steering lock to
position 1 or 2.
2. Press and hold one button of
the integrated rem ote control
located between the interior
lamp and the rear view mirror
until its control light begins to
flash at a rate of about once a
second. Continue holding down
the button.
Note:
The light blinks im m ediately if
the integrated remote control is
being program m ed for the first
time, or if its m em ory was
previously erased. If you are
reprogram m ing a previously
used button, the light will flash
after about 20 seconds.
3. Aim portable rem ote control
transm itter at the integrated
rem ote control transm itter to be
program m ed. W hile still holding
down the button on the inte
grated transm itter, press down
the button on your portable
remote control transm itter, until
the integrated rem ote control
light starts to flash rapidly. This