ABB RPC S-series Applications Manual page 21

3
Incremental changes of parameter values
The parameter values can easily be increased or decreased in incremental steps.
1
2
3HAC050970-001 Revision: -
3 Integrated Power Source application details
Action
Select program number from the
list
or
enter the new job number in the
field Program Number.
Tap OK.
Note
Switch parameters can only have value 0 or 1. The increment size for these
parameters must therefore be 1.
Action
Tap the Increment drop down
list and select size of the incre-
mental steps.
Tap the + (plus) button to in-
crease the value of the selected
job parameter.
Tap the - (minus) button to de-
crease the value of the selected
job parameter.
© Copyright 2014 ABB. All rights reserved.
3.1.3 Editing job parameters
Info/illustration
en1000001334
Info/illustration
en1000001335
Continued
21