Active Arc Welding System - ABB RPC S-series Applications Manual

2.3 Active arc welding system

General
The selection of the AW system determines which equipment is active when manual
operations (Gas On, Manual Wire feed, Editing jobs) are executed.
For information on how to change active arc welding system, see
welding system on page
Active power source information
The name of the active arc welding system is indicated in the upper right-hand
corner. The Integrated Power Source supports up to four robots and each robot
can have one RPC S-Series power source.
en1000001319
3HAC050970-001 Revision: -
2 Integrated Power Source application
23.
© Copyright 2014 ABB. All rights reserved.
2.3 Active arc welding system
Selecting arc
13