Baumatic BFE320 Instruction Manual page 22

169890en.indd 21 169890en.indd 21
• Unscrew, remove and then replace the position of the end
switch (E) and decorative peg (F) (for models with forced door
closing system).
• Unscrew the three screws fi xing the bottom hinge and then fi x
the bottom hinge on the opposite side.
• To fi t the door on the opposite side of the freezer proceed with
the above procedure in reverse.
• Repeat the procedure 3 and 4 on the bottom door. In case
there is no bottom door limit peg, transfer the bearing (G) and
washer to the opposite side of the door.
• To fi t the doors on the opposite side of the fridge freezer
proceed with the above procedure in reverse.
21
16.10.2006 11:36:31 16.10.2006 11:36:31