Baumatic BFE320 Instruction Manual page 11

Turning on the appliance
and setting the
thermostat
10
169890en.indd 10 169890en.indd 10
MODEL WITHOUT BUTTONS
A Temperature selector and on/off button
B Green LED (illuminates when the appliance is switched on)*
C Freezer alarm off button*
D Freezer alarm LED*
E Fast Freeze button*
F Fast Freeze LED*
* Certain models only.
You switch on your appliance by connecting it to your mains
supply and setting the thermostat. The thermostat is located on
the right hand side of the control panel.
• The appliance is switched on by turning dial A towards the
Max position.
• The green LED will come on when the dial moves past Min.
• The appliance is switched off when the arrow on the dial points
to the ON/OFF symbol
mains power.
• The thermostat automatically regulates the temperature inside
the freezer, depending on what position you have turned the
thermostat control knob to.
• Position means that the appliance is switched off and will
not cool.
• Position Min will give you a higher temperature inside the
freezer.
• Position Max will give you a lower temperature inside the
freezer.
• Ideally the thermostat should be set to the Eco position.
• The freezer section can cool down to -18°C and lower.
• IMPORTANT: The ambient temperature of the room, the
temperature of food and the amount of food that has been
placed in the freezer and how often the door is opened, will all
affect the temperature being maintained by the appliance.
• On the maximum setting (position Max), your freezer will work
harder to maintain a lower temperature. There is no need to
. However the appliance is still under
16.10.2006 11:36:23 16.10.2006 11:36:23