Table of Contents
Advertisement
4. Place the cable holder onto the stand (Figure 4).
Place the cables in the cable holder firmly and evenly.
5. Please check that you can still rotate, raise and lower the monitor screen after you have installed the cables (Figure 5 and
Figure 6).
Power Cord
6. Connect the power cord to a power outlet.
NOTE: •
Please refer to the Caution section of this manual for proper selection of the AC power cord (see
•
Please make sure that enough power is supplied to the monitor. Please refer to
"Chapter 4 Specifications" on page
DisplayPort Cable
Figure 5
35.
Figure 4
Security Slot
Power Cord
English−18
DisplayPort Cable
Figure 6
page
"Power Supply"
in the
7).
Advertisement
Table of Contents
