Baumatic BFD46 Instruction Manual page 28

BAUMATIC BFD46W dishwasher user manual
e) THEN, APPLY THE CONDENSATION STRIP.
The Condensation Strip must be fitted to the
underside of the worktop above your dishwasher
to protect it against any moisture. Its purpose
is to deflect steam rising from your appliance to
protect your worktop's underside.
The strip is located inside your
•
dishwasher.
Ensure the surface is clean prior to
•
sticking to underside of the worktop.
Separate the backing paper from the
•
strip.
Stick to the underside of the worktop.
•
Note: Failure to attach strip could
result in damage to the underside
of your work surface!
f) NOW YOU ARE READY TO PUSH THE
DISHWASHER INTO POSITION
NOTE
–
MAKE SURE YOU HAVE THE
DISHWASHER ON ITS SLIDE
RAILS
(SEE ILLUSTRATION ON
RIGHT).
* Note *
You can detach the top board
(5) that comes as part of your
dishwasher if you want to
install your dishwasher in your
cabinet.
THEN MOVE IT INTO THE
CABINET RECESS (AS
PICTURED ON RIGHT, 6-7),
ENSURING THAT IT IS BACKED
UP AGAINST THE WALL.
g) ENSURE THAT YOUR DISHWASHER IS LEVEL
IN ITS NEW POSITION.
NOTE:
YOUR DISHWASHER MUST BE
LEVEL FOR PROPER DISH RACK
(SEE FIGURE BELOW):
OPERATION AND WASH
PERFORMANCE.
27
27
(GO BACK AND LOOK