Fcc Compliance - Siemens CLSC3000 Installation Manual

CLSC3000
12

FCC Compliance

Installation Manual, CLSC004enI3c
© Siemens AG 2010 / Date of issue: 2010-05-19
Note!
This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to Part 15 of the FCC Rules and
meets all requirements of the Canadian Interference-Causing
Equipment Standard ICES-003 for digital apparatus.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference, in
which case the user will be required to correct the interference at his own
expense. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/T.V. technician for help.
Siemens AG is not responsible for any radio television interference caused
by unauthorized modifications of this equipment or the substitution or
attachment of connecting cables and equipment other than those specified by
Siemens AG. The correction of interference caused by such unauthorized
modification, substitution or attachment will be the responsibility of the user.
The use of shielded I/O cables is required when connecting this equipment to
any and all optional peripheral or host devices. Failure to do so may violate
FCC and ICES rules.
FCC Compliance
12-1