Table of Contents
Advertisement
CLSC3000
6
Safety Instructions
6.1
Symbols used in Documents
6.2
Safety Signs on the CLSC
Installation Manual, CLSC004enI3c
© Siemens AG 2010 / Date of issue: 2010-05-19
The following categories and symbols are used to mark danger notes and
important information.
Note!
This symbol indicates very important information that you have to
observe in order to ensure correct operation of the machine.
Non-observance of this note may lead to faults on the machine or
dangers to the environment.
Attention!
In conjunction with the heading Warning, this symbol points to
possible dangers to areas, machine parts and the environment.
Non-observance of these notes may damage equipment or the
environment.
You are informed about what can happen and how to eliminate the
problem.
Danger!
In conjunction with the heading Danger, this symbol means risk of
fatal injury or health hazard.
Non-observance of these instructions will have effects which are
harmful to the health through to deadly injuries.
You are informed about what can happen and how to eliminate the
problem.
Safety signs are affixed to the CLSC to mark residual dangers and to warn of
optical radiation and of hot surface.
Danger!
Risk of injuries
Not knowing and not following the safety signs exposes you to
potential danger.
Do not remove any safety signs attached to the Colour Letter Scanner.
Safety Instructions
Symbols used in Documents
6-1
Advertisement
Table of Contents
