Do Not Disturb - Russound CAS44 Manual

7.10 Do Not Disturb

Do Not Disturb is displayed on keypads as "On" or "Off". DND can be toggled On or Off with a
Plus or Minus command. There can also be a discrete On or Off command selected.
7.10.1 Do Not Disturb On/Off Toggle
The following example shows how to toggle Do Not Disturb "On" and "Off" for a particular
Zone.
Byte # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
Value F0 00 00 7F 00 00 70 05 05 02 00 zz 00 06 00 ## 00 00 00 00 00 01 xx F7
cc = controller number -1
zz = zone number -1
xx = checksum
Byte #16 = button event (Plus = 0x69 = On/Off toggle) or (Minus = 0x6A = On/Off toggle)
7.10.2 Set Do Not Disturb
Turn DND On or Off for a particular zone using a discrete message.
Byte # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
Value F0 00 00 7F 00 00 70 00 05 02 00 zz 00 06 00 00 00 01 00 01 00 ## xx F7
cc = controller number -1
zz = zone number -1
xx = checksum
Byte #22 = Do Not Disturb setting (0x00 = OFF, 0x01 = ON )
7.10.3 Get Do Not Disturb
The current DND setting for a particular zone can be obtained by using the following message.
Byte # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
Value F0 cc 00 7F 00 00 70 01 05 02 00 zz 00 06 00 00 xx F7
cc = controller number -1
zz = zone number -1
xx = checksum
The return message would look like the following.
Byte # 1 2 3 4 5
Value F0 00 00 70 cc 00 7F 00 00 05 02 00 zz 00 06 00 00 01 00 01 00 ## xx F7
cc = controller number -1
zz = zone number -1
xx = checksum
Byte #22 = Do Not Disturb setting (0x00 = OFF, 0x01 = ON )
6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
28