Setting The Play Mode; Repeat And Shuffle Play; Other Functions; Changing The Sound Settings - Sony CDX-GT62IPW Operating Instructions Manual

Setting the play mode

1
During playback, press (MODE).
The mode changes as follows:
Album Mode t Track Mode t
Podcast Mode* t Genre Mode t
Playlist Mode t Artist Mode
* May not appear depending on iPod setting.
Skipping albums, podcasts, genres,
playlists and artists
To Press
(1)/(2) (ALBUM –/+)
Skip
[press once for each]
(1)/(2) (ALBUM –/+)
Skip
continuously [hold to desired point]

Repeat and shuffle play

1
During playback, press (3) (REP) or
(4) (SHUF) repeatedly until the
desired setting appears.
Select
TRACK
ALBUM
PODCAST
ARTIST
PLAYLIST
GENRE
SHUF ALBUM
SHUF ARTIST
SHUF PLAYLIST
SHUF GENRE
SHUF DEVICE
To return to normal play mode, select "
or "SHUF OFF. "
Note
If (4)(SHUF) is pressed during podcast playback, only
the first content will playback.
To play
track repeatedly.
album repeatedly.
podcast repeatedly.
artist repeatedly.
playlist repeatedly.
genre repeatedly.
album in random order.
artist in random order.
playlist in random order.
genre in random order.
device in random order.
OFF"

Other functions

Changing the sound settings

Adjusting the sound
characteristics
1
Press the select button repeatedly
until the desired item appears.
2
Rotate the control dial to adjust the
selected item.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
The following items can be set (follow the page
reference for details):
" " indicates the default settings.
z
EQ3
To select an equalizer type: "XPLOD" (
"VOCAL," "EDGE," "CRUISE," "SPACE,"
"GRAVITY," "CUSTOM" or "OFF."
DSO*
1
To select the DSO mode: "1," "2" (
"OFF." The larger the number, the more
enhanced the effect.
LOW* 2 , MID* 2 , HI* 2 (page 12)
To customize the equalizer curve.
BAL (Balance)
To adjust the balance between the right and left
speakers: "RIGHT-10" – "CENTER" (
"LEFT-10"
FAD (Fader)
To adjust the balance between the front and rear
speakers: "FRONT-10" – "CENTER" (
"REAR-10"
SUB* 3 (Subwoofer volume)
To adjust the subwoofer volume: "+10 dB" –
"0 dB" ( ) – "–10 dB"
z
("ATT" is displayed at the lowest setting.)
AUX* 4 (AUX level)
To adjust the volume level for each connected
auxiliary equipment. This setting negates the
need to adjust the volume level between sources
(page 13).
Adjustable level: "+18 dB" – "0 dB" (
"–8 dB"
*1 When tuner is selected as the source, the default
setting is "OFF."
*2 When EQ3 is activated.
*3 When the audio output is set to "SUB-OUT"
(page 12).
*4 When AUX source is activated.
),
z
), "3" or
z
) –
z
) –
z
) –
z
11