Samsung ML-451 Series Service Manual page 100

3. Disassembly and Reassembly
7. To remove the Motor, remove 4 screws and 4
connectors.
8. Remove the 2 SPUR Gear after remove screw.
NOTE
When re-assembling these, align the groove of both
gears.
9. Separate the bracket and main board after remove 5
screws.
3-28
10. Remove the SPUR Gear after remove screw.
11. There are 3 Ass'y actuator shields. This manual
describes disassebmly procedure for middle shield.
Remove 2 screws(green color) from the front.
12. Remove 2 screws (green color) from the rear.
Copyright© 1995-2016 SAMSUNG. All rights reserved.